The Ultra-Hard Top Plus 2-drum spill pallet is a reliable and efficient solution for storing one or two 205-liter drums securely. The unit features roll-top doors above and swing-out doors below, which offer complete and effortless access to the spill containment area inside. You can easily place your drums inside the pallet using drum handling equipment or our optional ramp, and then close the doors to ensure complete protection from environmental factors and unauthorized access. Additionally, the unit can be locked to enhance security measures.
Product Code | Description | Length mm | Width mm | Height mm | Grating Surface Length mm | Grating Surface Width mm | Weight Capacity kg | Containment Capacity L | Product Weight kg |
CHUT 9612 | 2-Drum Plus, No Drain | 1708 | 1047 | 1879 | 1320 | 660 | 2041 | 250 | 117 |
CHUT 9613 | 2-Drum Plus, With Drain | 1708 | 1047 | 1879 | 1320 | 660 | 2041 | 250 | 117 |
Product Code | Description | Length mm | Width mm | Height mm | Weight Capacity kg | Product Weight kg |
CHUT 0676 | Ramp, Polyethylene with 203mm Steel Plate | 1409 | 723 | 222 | 317 | 19 |
No, there is only access from one side via either the roll-up door and/or the “barn doors”.
No, the ramp (Product CHUT 0676) is optional.
The Ultra-Hard Top 2-Drum Plus is made of polyethylene (LLDPE) so in the event of a fire the unit will melt. It is not intended to be used in place of a safety cabinet.
No, the spill pallet is not completely waterproof. It is more accurately described as weatherproof. In other words, in standard weather conditions, your drums and/or containers should be protected and water gathering in the pallets is not a concern. However, during very gusty conditions or very heavy rainfall, some water may get into the unit. It is good practice to inspect the interior of the hard top after any severe weather.
Yes, there is enough room inside of the hard top for two drums and the ramp.
At its peak (the top is sloped) the height is 1581mm the inside width is 844mm and the inside length is 1597mm.
UltraTech’s general response to this question is at least ten (10) years. You can expect longer, but the actual life is dependent on several factors. UltraTech has been making outdoor spill containment products since 1993. We have a good sense of realistic life expectancy based on all those years of experience. UltraTech uses the highest-rated UV package in the resin formulation it uses to create the longest outdoor life available for a PE product
The most important environmental factors are ultraviolet exposure and chemical exposure. In the absence of chemical compatibility concerns (determined by the UltraTech compatibility chart for PE products), the next most important factor for outdoor, polyethylene spill containment products will be ultraviolet irradiation (UV) exposure. The most important factors with reference to UV are thickness, UV Inhibitor (UVI) content, and pigment colour, type, and concentration. Ultraviolet irradiation exposure causes molecular structure and bond changes that result in the embrittlement of PE. Very thin PE can become brittle and fracture in less than a year (think contractor’s PE Vis queen sheeting). Thicker parts take longer to break down. The addition of UV Inhibitors to the PE allows it to sustain more UV exposure without breaking down. Darker pigments, inorganic pigments, and higher concentrations of pigments also individually and collectively will give PE a longer life before appreciable UV damage occurs.
There is an outdoor spill containment product that has been in use in northeast Florida since 1986 and is still in active use today. UltraTech suggests its Ultra-Track Pans, used for outdoor railroad track spill containment, have a minimum of a twenty-year life.
The standard drain is a threaded hole in the sidewall with a ¾” polyethylene plug with NPT threads installed.
AUSTRALIAN DISTRIBUTOR OF:
Looking for product information? Want to discuss your fabrication requirements? Need a quote?
