Close this search box.

Ultra-Post Protector Plus

Put an end to dents, scratches and constant upkeep of bumper posts and bollards.

Bumper posts and bollards serve to safeguard storefronts, pedestrian walkways, utility boxes, and various other structures.

Ultra-Post Protectors are polyethylene (LLDPE) sleeves designed to slide over the posts/bollards, preserving their appearance or allowing them to be colour-matched to branding.


  • Installation is effortless with a one-piece, lightweight design; simply slide over existing posts without the need for tools or hardware.
  • The vibrant safety yellow colour enhances cosmetic appeal and aids in identifying entryways for trucks and other vehicles; custom colours are also available.
  • Constructed entirely of polyethylene, requiring no maintenance.
  • Available in four sizes to accommodate most bumper posts and bollards, with additional sizes available upon request.
  • Robust construction minimises scratches, dents, and other damage.
  • UV inhibitor in the resin combats the degrading effects of sunlight, ensuring years of reliable service.


How to Measure Your Post for an Ultra-Post Protector

Steel pipe used for bollards is measured by the inside diameter. Therefore, the bollard’s outside diameter is 12mm to 16mm larger. To purchase the correct post sleeve:

  1. Measure the exact post circumference with flat tape.
  2. Divide the circumference by 3.14 to get the diameter of the post in millimeters.
  3. In ordering information, find the most suitable post-diameter range.


Product CodeDescriptionLength (mm)Width (mm)Height (mm)Product Weight (kg)Nominal Thickness
CHUT1525107mm Post1011011,32035
CHUT1526152mm Post1521521,32053
CHUT1527177mm Post1771771,32066
CHUT1528203mm Post2032031,32076


1. How do I install an Ultra-Post Protector?

Each Ultra-Post Protector is delivered with two pieces of patented foam neoprene tape. Apply the neoprene tape around the circumference of the steel bollard 76 mm down from the top of the post and 76mm up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If the above directions are followed correctly, the Ultra-Post Protector should fit tight with no gaps.

2. Are there any other colours available? Do you do custom colours?

Other colours are available.  Custom colours are also available but do require a minimum order.  Please contact us for more information on these options.3.3.Are there any other sizes available?

3. Ultra-Post Protectors for the following size posts are also available:

76mm, 90mm, 101mm, 127mm, 152mm, 177mm, 203mm, 254mm, 304mm.  (1/4″ thickness).  Please contact us for more information.


Australian Made. specialised fabrication.

Looking for product information? Want to discuss your fabrication requirements? Need a quote?

Hi there.

Want to get in touch?

Drop us a line

Login to your
direct reseller account