The challenge of outdoor spill containment lies in the presence of rain—a factor not encountered indoors. When rainwater accumulates in the containment unit’s sump, it compromises the unit’s ability to effectively contain spills. Essentially, for each gallon of rainwater collected in the sump, there is a corresponding reduction in the capacity to contain chemicals, fuels, or hazardous materials.
Addressing this issue is the Ultra Bund Accessories Self Bailer. This accessory is designed to seamlessly attach to any spill containment unit, usually through a bulkhead fitting. It allows rainwater to drain through while filtering out any residual oil, gas, or hydrocarbons, ensuring that only clean water is released. In the event of a spill, the self-bailer activates, sealing off completely to prevent any liquid from escaping.
Product Code | Description | Colour | Length mm | Width mm | Height mm | Product Weight kg | Capacity L | Flow Rate Per Hour |
CHUT 9935 | Self Bailer – Standard | White | 711 | 88 | 88 | 1 | .4 | 18 |
CHUT 9937 | Self Bailer – Large | White | 914 | 114 | 114 | 3 | .8 | 25 |
CHUT 9926 | Self Bailer – XL | White | 990 | 165 | 165 | 5 | 3 | 48 |
Product Code | Description | Material | Colour | Length mm | Width mm | Height mm |
CHUT 9936 | Self Bailer – Standard Replacement Filters, 2 Pack | PVC | White | 355 | 203 | 127 |
CHUT 9938 | Self Bailer – Large Replacement Filter, 1 Pack | PVC | White | 406 | 152 | 152 |
¹Capacity is based on testing with 5W-30 Synthetic Blend Motor Oil.
²Flow Rate is based on testing with 107mm water column.
Cut-off loss is defined as the amount of hydrocarbons that may pass through the Ultra-Self Bailer prior to complete shut-off in the event of a spill. Minimal cut-off loss may be observed for each size after they are put into service.
Outdoor spill containment faces a challenge in the form of rain. Rainwater that has collected in a spill containment sump reduces that sump’s capacity to effectively contain a spill. In other words, if a containment sump is filled with water, it can no longer be filled with a spill.
The Ultra Bund Accessories Self Bailer allows rainwater to pass through while removing any residual hydrocarbons from the water flow.
The Ultra-Self Bailer comes with a female 19mm NPT fitting, as well as a coupler fitting. If your pallet, sump, etc. is fitted with a 19mm NPT drain (all UltraTech products use this type of drain), you will not need additional parts.
If your part does not have a 19mm NPT drain, you will also need a bulkhead fitting (P/N 1073). A hole (40mm) will need to be drilled into the sidewall of your product, and the bulkhead fitting installed in the hole. The Ultra-Self Bailer (using the included coupler fitting) can then be installed in the bulkhead fitting.
As you might have guessed, the shut-off valve is a manual shut-off to completely stop water (and anything else) from passing through the Ultra-Self Bailer. The shut-off valve is useful when switching out filter cartridges. It can also be used if you happen to see a spill taking place, in which case you can prevent the spill from reaching the filter media and won’t need to replace it with a new one.
The life of your Ultra-Self Bailer’s filter media cartridge will depend on the amount of oil/hydrocarbons present in the water that is draining through the unit. As the filter media becomes saturated with oil, it expands and the water flow will become more and more restricted. The filter should be replaced once the water’s flow rate is no longer sufficient.
When circumstances allow, the use of polypropylene absorbents (not included) inside of the containment sump as a “pre-filter” should extend the life of your Ultra-Self Bailer.
No, the pictures are correct. By placing the drain port at the top, any water that passes through is forced to flow up through the filter media, giving it (the media) more time to remove oil and hydrocarbons from the flow.
Water flow from the drain port of the Ultra-Self Bailer is an excellent indicator of the amount of oil/hydrocarbons that have been absorbed by the unit. When that water flow has been severely restricted or completely stopped, the Ultra-Self Bailer’s filter is “full” and needs to be changed as soon as possible.
AUSTRALIAN DISTRIBUTOR OF:
Looking for product information? Want to discuss your fabrication requirements? Need a quote?
