Home » Spill Containment on Land » Hard Tops » Ultra-Hardtop 4-Drum Plus
The Ultra-Hard Top Plus 4-DRUM spill pallet is a highly efficient storage solution that offers a secure and easily accessible containment area for up to four 205 litre drums. The unit features a roll-top door system on top and swing-out doors on the bottom, providing full access to the interior spill containment area.
The drums can be placed inside the unit using either drum handling equipment or the optional ramp, after which the doors can be securely closed. The spill pallet ensures protection from environmental elements and unauthorised entry, and its locking mechanism provides an added layer of security. Additionally, the unit’s design guarantees that any spills or leaks are contained, thereby safeguarding the surrounding property.
The innovative “Cross of Life” design protects the pallet’s structural integrity during heavy loads over time. As more weight is applied to the top of the pallet, the Cross of Life design draws the all-polyethylene sides towards the center instead of allowing them to sag outwards. Learn more.
Benefit from the industry’s most robust warranty, offering five years of protection against any defects in material or workmanship. Learn more.
Product Code | Description | Length (mm) | Width (mm) | Height (mm) | Weight Capacity (kg) | Containment Capacity (L) | Weight (kg) |
CHU9636 | 4-DRUM Plus, No Drain | 1638 | 1574 | 2006 | 4082 | 283 | 118 |
CHU9637 | 4-DRUM Plus, With Drain | 1638 | 1574 | 2006 | 4082 | 283 | 118 |
Product Code | Description | Length (mm) | Width (mm) | Height (mm) | Weight Capacity (kg) | Weight (kg) |
CHU0676 | Ramp, Polyethylene with 203mm Steel Plate | 1409 | 723 | 222 | 317 | 19 |
No, we do not recommend moving loaded hard tops.
It is rotationally molded using low-density polyethylene.
Yes, the hard top can be lifted with a forklift or a pallet jack from all four sides.
Yes, it complies with EPA Spill Containment regulations for the storage of 205-litre drums.
Yes, it uses a “built-in” UV inhibitor to prevent the polyethylene (LLDPE) from breaking down in the sun.
It is weather-resistant. Water is not likely to get inside during a regular/normal rainstorm. However, in high winds, some rain may get inside the hard top.
Yes, standard padlocks (2) can be used to lock the hard top and prevent any unauthorized access.
UltraTech’s general response to this question is at least ten (10) years. You can expect longer, but the actual life is dependent on several factors. UltraTech has been making outdoor spill containment products since 1993. We have a good sense of realistic life expectancy based on all those years of experience. UltraTech uses the highest-rated UV package in the resin formulation it uses to create the longest outdoor life available for a PE product
The most important environmental factors are ultraviolet exposure and chemical exposure. In the absence of chemical compatibility concerns (determined by the UltraTech compatibility chart for PE products), the next most important factor for outdoor, polyethylene spill containment products will be ultraviolet irradiation (UV) exposure. The most important factors regarding UV are thickness, UV Inhibitor (UVI) content, and pigment colour, type, and concentration. Ultraviolet irradiation exposure causes the molecular structure and bond changes that result in the embrittlement of PE. Very thin PE can become brittle and fracture in less than a year (think contractor’s PE Visqueen sheeting). Thicker parts take longer to break down. The addition of UV Inhibitors to the PE allows it to sustain more UV exposure without breaking down. Darker pigments, inorganic pigments, and higher concentrations of pigments also individually and collectively will give PE a longer life before appreciable UV damage occurs.
There is an outdoor spill containment product that has been in use in northeast Florida since 1986 and is still in active use today. UltraTech suggests its Ultra-Track Pans, used for outdoor railroad track spill containment, have a minimum of a twenty-year life.
The standard drain is a threaded hole in the sidewall with a 19mm polyethylene plug with NPT threads installed.
MASTER DISTRIBUTOR OF:
Looking for product information? Want to discuss your fabrication requirements? Need a quote?