Close this search box.

Ultra-IBC Spill Pallet

Double stack IBC Tanks and Save Valuable Floor Space

The Ultra-IBC Spill Pallet comes with a remarkable weight capacity of 7257 kg, which allows you to double-stack IBC containers without any fear of spills in confined spaces. This spill pallet holds an enormous 1514kg of spillage, keeping you in compliance with EPA spill containment regulations. The all-polyethylene construction of the spill pallet ensures excellent chemical compatibility, making it a reliable solution for containing hazardous chemicals.


  • 7257kg weight capacity (UDL) accommodates up to two full IBC containers.
  • 100% low-density polyethylene (LLDPE) construction resists UV rays, rust, corrosion and most chemicals
  • 100mm thick, two‐section decking is supported by all‐poly inner pedestals for superior load handling
  • Heavy‐duty construction permits long‐term stacked storage of two IBCs to save space
  • Textured grating holds a variety of IBC sizes; if tank has feet or pegs, be sure to use proper support pads or plates
  • All grating and inner components are easily removed for quick and easy clean-up.


Five-Year Warranty

Benefit from the industry’s most robust warranty, offering five years of protection against any defects in material or workmanship. Learn more. 

Product CodeDescriptionLength mmWidth mmHeight mmWeight CapacityAbsorption Capacity LWeight kg
CHUT1057IBC Spill Pallet, No Drain1492149283872571514201
CHUT1058IBC Spill Pallet, w/ Drain1492149283872571514201



Product CodeDescriptionLength mmWidth mmHeight mmWeight kg
CHUT1055Pullover Cover1492121916893


1. Why would I choose the Ultra-IBC Spill Pallet over the Ultra-IBC Spill Pallet Plus?

If you need a larger sump capacity or a greater weight capacity, then the Ultra-IBC Spill Pallet may be a better option for you.

2. Why would I choose the Ultra-IBC Spill Pallet Plus over the Ultra-IBC Spill Pallet?

The Ultra-IBC Spill Pallet Plus has a lower profile (711mm) forklift friendly.

3. How large of an IBC can I store on the Ultra-IBC Spill Pallet?

The standard dimensions for a typical plastic IBC in Australia are as follows:

  • Length: 1200 mm
  • Width: 1000 mm
  • Height: 1160 mm

These dimensions result in an IBC capacity of 1000 litres

Keep in mind that IBC’s are subject to safety regulations and their use must comply with Australian standards and guidelines.

4. Is the Ultra-IBC Spill Pallet forklift friendly?

No.  Ultra IBC Spill Pallet does not have forklift pockets. The Ultra IBC Spill Pallet Plus is forklift-ready and may be a suitable alternative.

5. What is the Ultra-IBC Spill Pallet made of?

Our pallets are made of 100% polyethylene (LLDPE) which provides superior chemical compatibility and corrosion resistance.

6. Can you stack two IBCs on top of the Ultra-IBC Spill Pallet?

The Ultra-IBC Spill Pallet is capable of safely handling up to 7257kg (UDL), so weight is not likely to be an issue.  However, it is strongly recommended that local and Federal regulations be reviewed to ensure compliance with containment capacity requirements.

7. Is the Ultra-IBC Spill Pallet available with a drain?

Yes, you can order our spill pallet either with a drain (Product CHUT1058) or without a drain (Product CHUT1057).

8. What type of drain is used for these pallets?

The standard drain is a threaded hole in the sidewall with a 19mm polyethylene plug with NPT threads installed.

9. Can the Ultra-IBC Spill Pallet be used outdoors?

The Ultra-IBC Spill Pallet is made of 100% polyethylene (LLDPE) so it won’t rust or corrode.  It also has UV inhibitors so it will last for many years in the sunlight without degrading.  HOWEVER, the biggest consideration for using an Ultra-IBC Spill Pallet outside is rain.  If the sump is filled (even partially) with rainwater, it has lost or reduced its capacity to capture a spill from the IBC that’s on top of it.  There are a few ways to address this issue:

9.1 Place the IBC and the pallet somewhere where there is a roof/shade or some other form of overhead protection to keep the rain and elements out.

9.2 Instead of purchasing the Ultra-IBC Spill Pallet, buy the Ultra-IBC Hard Top which has a built-in rigid polyethylene (LLDPE) cover.

9.3 Add an Ultra-Self Bailer to the Ultra-IBC Spill Pallet sump.  This unit will allow clean water to pass through while filtering out any gas, oil or other hydrocarbons.

10. Can the Ultra-IBC Spill Pallet support an IBC that has pedestal posts for legs, or just flat bottom IBCs?

The pallet has a 7257kg capacity.  This is for uniformly distributed loads.  An IBC that is supported by pedestal post or feet focuses all of its weight on those feet.  If the dimensions of those feet are not large enough to properly displace the weight on the spill pallet’s grating, it could be an issue.  As a precaution, steel plates (at least 304mm x 304mm) can be used under the feet in order to more evenly distribute the weight over a greater area.  If you have any concerns about your IBCs weight, please contact our Sales Team.


Australian Made. specialised fabrication.

Looking for product information? Want to discuss your fabrication requirements? Need a quote?

Hi there.

Want to get in touch?

Drop us a line

Login to your
direct reseller account