Search

Ultra-Safety Cabinet Bladder System

Out of sight, should not be out of mind

Fire-rated drum safety cabinets were originally designed to protect their contents from direct flame and heat, without considering spill control.

The Ultra-Safety Cabinet Bladder Systems offer a convenient and cost-effective solution for retrofitting all drum safety cabinets available on the market. By integrating these units into your safety cabinet, you effortlessly comply with fire safety and spill containment regulations.

FEATURES

  • Installation is straightforward: raise existing drum cabinets, slide the Ultra-Safety Cabinet Bladder System into place, and lower the cabinet onto the structural steel frame.
  • The heavy-duty inner steel framework ensures cabinet stability, even during a fire.
  • Specifically designed to retrofit all vertical drum storage cabinets on the market; see support frame dimensions for more details.
  • The only low-profile spill containment devices designed for safety cabinets.
  • Significant leaks or spills trigger the hidden containment bladder to unfurl, providing complete spill containment. Small spills are captured inside the polyethylene (LLDPE) sump.
  • The low-profile design positions drum cabinets only 158mm off the plant floor, allowing for convenient waste pouring into drum-top funnels at a safe height. This reduces the risk of splashes into the eyes or face compared to taller containment devices.
  • Significant leaks flow over the cabinet door sill and into the polyethylene (LLDPE) containment bladder, which automatically unfurls as the sump fills up.
  • Benefit from the industry’s strongest warranty: five years of protection against any material or workmanship defects.

Ultra-Safety Cabinet Bladder System MODELS

Product CodeDescriptionLength mmWidth mmHeight mmWeight Capacity kgContainment Capacity LProduct Weight kg
CHUT24201-Drum Model95895815868035225
CHUT24212-Drum Model1,6009771581,36042038

NOTE: Safety cabinet is NOT included.

FAQ

1. Is the safety cabinet included?


The safety cabinet is NOT included with our systems, only the containment portion which includes the yellow polyethylene (LLDPE) sump, the black steel frame to support the safety cabinet, and the bladder attachment.

2. How do I know if the Ultra-Safety Cabinet Bladder System will work with my cabinet?


Years ago, we designed this product to fit every safety cabinet (designed to hold 1 or 2 208litre drums vertically) available at the time. However, it’s a good idea to check the support frame dimensions listed in the table above and/or contact us.

3. How much does the bladder hold?

The bladder adds 249L of containment capacity to each safety cabinet bladder system.

4. My bladder was deployed, what do I do now?


Bladders are NOT reusable so once you’ve transferred the spilled liquid to an approved container and disposed of the used bladder, (in accordance with local and Federal regulations) you will need to install a new one.

5. Is the Ultra-Safety Cabinet Bladder System able to be moved with a forklift or pallet jack?

The systems are easily moved by hand and light enough to be loaded onto a hand truck or dolly but are not designed to be lifted with a forklift or pallet jack.

6. When should the bladder be replaced?

The bladder(s) should be replaced for any of the following reasons: (1) It captures a spill (regardless of the size of the spill), (2) It deploys, rolls, or falls out of the bladder attachment housing. (3) It has sat unused for more than five years.

AUSTRALIAN DISTRIBUTOR OF:

Australian Made. specialised fabrication.

Looking for product information? Want to discuss your fabrication requirements? Need a quote?

Hi there.

Want to get in touch?

Drop us a line

Login to your
direct reseller account