Designed specifically to capture plastic pellets and resin from railroad tankers, the Ultra-Pellet Pan track pan offers a tailored solution, allowing rainwater to drain out effectively, thus preventing the need for costly cleanups and potential regulatory fines.
NOTE: The Ultra-Pellet Pan is not suitable for containing any liquids.
Benefit from the industry’s most robust warranty, offering five years of protection against any defects in material or workmanship. Learn more.
Product Code | Description | Length (mm) | Width (mm) | Height (mm) | Capacity (L) | Weight (kg) |
CHU7560 | Center Pan with Grates | 1359 | 1359 | 152 | 250 | 51 |
CHU7562 | Side Pan with Grates | 1359 | 699 | 152 | 250 | 26 |
CHU7570 | Pellet Deflector, 5-pack | 406 | 1219 | N/A | N/A | 2 |
Each pan is fitted with a number of 76mm drains. Two in each of the standard pans, and three in each composite pan.
No, water will drain regardless of the amount of pellets that are contained. However, it is important (and not just for proper drainage) that any pellets that are contained by the pans be removed as soon as possible.
The installation process for either pan is relatively simple and requires only basic hand tools. Product specialists and our technical team are also available should you need further assistance. Please feel free to call them at 1300 880 623.
Yes, while the Ultra-Pellet Pans are designed for a long-term installation, they can be removed if necessary.
The grating is required in the standard pans and recommended (but not necessary) for composite pans.
Basic tools that would be available in almost all workshops is all that is required for the installation. Some slightly more specialised tools may be needed for site preparation. Please see the installation instructions here for a complete list.
Not necessary but HIGHLY recommended. Without them, the pellets are very likely to bounce out of the pans and into the surrounding environment.
Without drains, they are not pellet pans. UltraTech’s other railroad containment products, the Ultra Pellet Pans, are essentially the same as pellet pans but without drains so that they can be used to contain liquid leaks and spills.
The drains in the Ultra-Pellet Pans are designed to capture pellets 1mm in diameter or larger.
MASTER DISTRIBUTOR OF:
Looking for product information? Want to discuss your fabrication requirements? Need a quote?
